This ultrasonic dermaplane wand and eyebrow trimmer with 3 speeds, LED light, and 6 refill blades (3 dermaplane, 3 eyebrow). Gently removes dead skin and peach fuzz for smoother, radiant skin.

Ultrasonic wand, refill blades, charging cable

5.12 X 1.1 X .56

Fully charge device before using. Start with a cleansed face - make sure it’s free from makeup, oil, and impurities. Keep your skin hydrated before using the device. Attach the dermaplaning blade head to the wand. • Press and hold the power button for 2 seconds. The LED light will turn on and the device will begin to pulsate. Click the power button to change speeds. • Hold the device at a 45° angle against your skin and with a gentle touch, glide the Ultrasonic Dermaplane Wand over the areas you wish to treat, focusing on unwanted stray hairs, peach fuzz and aky skin. • Hold down the power button to turn o the wand. • Safely dispose of used blade head and clean and store your device for your next use. • For best results use once every 3-4 weeks. EYEBROW TRIMMING • Attach the Eyebrow Trimming blade head to the wand. • Press and hold the power button for 2 seconds. The LED light will turn on and the device will begin to pulsate. Click the power button to change speeds. • Hold the device at a 45° angle against your skin and with a gentle touch, glide the Ultrasonic Eyebrow Trimmer carefully over unwanted brow hair. • Hold down the power button to turn o the wand. • Safely dispose of used blade head and clean and store your device for your next use. • For best results use once every 1-4 weeks. To replace the blade, gently press the unlock button. The blade will pop upwards for you to remove and discard. Install the new blade head by sliding the back of the component downward into the empty wand until it clicks into place.

ABS material

Device is not waterproof/is not designed to be submerged in water. Before first time use device should be fully charged (takes approximately one hour). Device charges through a USB-C port and will flash while charging. Ensure charging cable is dry before plugging it in to avoid electric shock. Once fully charged the light will remain solid. Do not charge the device near water or in direct sunlight. store device away in a safe space and away from water. Avoid using device on sunburned, swollen, or recently treated skin. If you experience any pain or discomfort, discontinue use immediately. Some users may experience a temporary tingling sensation after use, due to increased microcirculation. If your skin feels tight, inflamed, or shows signs of irritation (redness, burning, etc.), discontinue use and consult a physician. Do not use the device on infected or irritated skin (e.g., rashes or open wounds). Do not dissemble the device. Do not operate device if damaged. Keep device out of reach of children. Avoid using device during pregnancy. Device is not intended for use on children under 12 years of age. After use, hold down the power button to turn off the device. For your safety, the device will automatically deactivate after 10 minutes of continuous use. After use, throw away the used blade head and clean and store your device for your next use. To replace the blade, gently press the unlock button. The blade will pop upwards for you to remove and discard. Install the new blade head by sliding the back of the component downward into the empty wand until it clicks into place. The boxes that hold each type of blade head are labeled accordingly. One set is specially designed for facial hair removal, while the other set is tailored for precise eyebrow

24M