The Unicorn Disco Bath Light brings magic and fun to your bath time. Watch as it glows and changes colours creating a relaxing and playful atmosphere. Perfect for anyone who loves unicorns or wants to add a little sparkle to their soak.

1 Bath Light, 1 Battery Pack, 1 Unicorn Floatie

4.5" X 3" X 5"

Step One: Turn the unicorn over and gently pull the light and battery pack out of the base. Step Two: Remove the three screws from the side of the battery pack using a mini cross head screwdriver. Step Three: Open the top to expose the batteries. Make sure not to pull it open too hard as the wires could get damaged. Step Four: Remove the plastic tab/insert 3 LR44 batteries if replacing them (the side with the + is to face the spring). Make sure that the rubber ring seal is positioned into its groove as this will keep the light mechanism watertight. Step Five: Place the top back on the battery pack and tightly screw back together. Step Six: Squeeze the battery pack to make the light flash (if it does not light up please refer to step four). Step Seven: Insert battery pack into the bottom of the unicorn. Place the unicorn into the water and boogie. Continue to squeeze the unicorn to adjust the settings and to switch off.

30% abs 70%PVC

3 LR44 Batteries

Wipe clean